Garland SET 352 E Manuel D'instructions page 35

- Check that the temperature of the blade is not
extremely high. If it is, wait a few minutes for the
blade to cool.
- Always use security gloves when unblocking the
blade.
- With the help of suitable tooling, remove the
blocking element from the blade.
While cutting branches, in order to be good for the
user, the handle can be rotated 90º. To rotate the
handle:
- Turn off the engine (If machine is running).
- Free the handle by pulling the locking button (1).
(This lever will only move if you are not pressing
the on/off switch (2)).
- When the handle is position in the proper position,
loosen the handle locking button.
- When the handle is blocked, start to work.
1
6.3. FINISHING USAGE
When you stop using the machine disconnect the
machine.
7. MAINTENANCE AND SERVICE
Carry out random inspections on the machine to
ensure an efficient use of the machine. For a complete
maintenance take the machine to your nearest service
agent.
90º
2
It is always necessary to stop the machine, wait
for the blades to stop before carrying out any cleaning
or maintenance work on the machine and when
transporting the machine.
Never attempt to carry out any maintenance work
on the machine if the machine is running. Carry out
all maintenance work on a flat surface and on a clear
surface.
Unplug the machine always before carrying
out any work on the pump. Read the
instruction manual before carrying out any
maintenance work.
WARNING! Do not change the machine or its cutting
elements. An incorrect change to these elements
could cause SEVERE PERSONAL DAMAGES OR
DEATH.
Only use original spare parts and accessories for this
machine so as to obtain the best performance from
the machine.
These spare parts and accessories can be found
in the official distributors of the brand. The use of
other spare parts and accessories could result in risks
to the end user, people who are nearby and to the
machine.
7.1. MAINTENANCE AFTER USAGE
Carry out the following maintenance work once
you finish your task to guarantee that the machine
functions correctly next time.
7.1.1. GENERAL CHECKS
Check the cable and ensure that the cable has neither
worn off or has been cut.
35/124
English