CAME 806XG-0080 Mode D'emploi page 10

ENGLISH
General precautions for installers
Read the instructions carefully before beginning the installation and
carry out the procedures as specifi ed by the manufacturer. • Installation,
programming, commissioning and maintenance must only be carried out
by qualifi ed, expert technicians and in full compliance with the applicable
law. • Before carrying out any cleaning or maintenance, or replacing any
parts, disconnect the device from the power supply. • Only use this product
for its intended purpose. Any other use is hazardous. • The manufacturer
cannot be held liable for any damage caused by improper, unreasonable
or erroneous use. • The product, in its original packaging supplied by the
manufacturer, must only be transported in a closed environment (railway
carriage, containers, closed vehicles). • If the product malfunctions, stop
using it and contact customer services at https://www.came.com/global/en/
contact-us or via the telephone number on the website. • The manufacture
date is provided in the production batch printed on the product label. If
necessary, contact us at https://www.came.com/global/en/contact-us. •
The general conditions of sale are given in the offi cial CAME price lists.
Legislative references
This product complies with the applicable standards in force at the time of manufacturing.
CAME S.p.A. declares that the product described in this manual complies with Directive
2014/53/EU and the Radio Equipment Regulations 2017. • The full EC declaration of
conformity and UK Conformity Assessed (UKCA) marking information can be found at www.
came.com.
Dismantling and disposal
Dispose of the packaging and the device responsibly at the end of its life cycle, in compliance
with the laws in force in the country where the product is used. The recyclable components are
marked with the material symbol and ID.
THE DATA AND INFORMATION IN THIS MANUAL MAY BE CHANGED AT ANY TIME AND
WITHOUT NOTICE.
MEASUREMENTS ARE IN MILLIMETRES, UNLESS STATED OTHERWISE.