Operating Instructions; Start-Up - Truma TEB-3 Mode D'emploi

Operating instructions

Start-up

Always observe the operating instructions prior to
starting! The vehicle owner is responsible for correct
operation of the appliance.
TEB-3 – 12 V
External control panel
Integrated control panel
a = Control knob for fan power (1 – 5)
b = Rotary switch for operating modes
c = Automatic mode (Heating)
The electronics control the fan power required and limit
the speed to the set value.
d = Off
Trumavent
e
man
b
d
a
c
auto
12 V
2
1
b
3
c
A
d
O
e
M
4
f
5
e = Manual fan power setting
Set desired speed at control knob (a).
f = Booster level (only with integrated control panel)
Fan power to highest value – maximum air flow volume.
When power packs or power supply units are being
used, note that the output voltage is between 11 V and
15 V and the alternating current ripple is < 1.2 Vpp. We rec-
ommend the automatic chargers from Truma for the various
applications. Please contact your dealer. Other chargers may
only be used in conjunction with a 12 V battery as a buffer.
a
9