Klarstein VAPOAIR Mode D'emploi page 22

EN
22
TROUBLESHOOTING
Problem Possible cause
Power lamp off,
No power supply
does not work
Power lamp on, No water in the water tank
no fog outlet
Safety switch is too loose
with fan
New unit
Abnormal fog
smell
Dirty water or water left
sitting too long
The power lamp
is on, but the Too much water in the water
appliance is not basin
working
Too much lime in the water
basin
Fogging power
is too low
Water is too dirty or water
has been in the tank too long
Resonance in the water tank
when water is too low
Unusual noise
Appliance is on an unstable
surface
Mist escapes
There are gaps between the
next to the mist
nozzle and the water tank
nozzle
Solution
Connect power supply unit,
switch on
Fill the water tank with water
Tighten the switch
Remove water container,
cover lid, leave in a cool
place for 12 hours
Clean water tank, fill with
fresh water
Remove water from the water
basin, close the water tank
cover tightly
Clean the converter
Clean water tank, fill with
fresh, clear water
Fill the water tank with water
Move the appliance to a
stable, flat surface
Immerse the nozzle in water
for a longer period of time
and then attach it to the
opening on the water tank