Rapid Heating; Setting The Clock; Setting The Timer - Siemens HC744540 Mode D'emploi

Use the + button to set a later end time.
6.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.
3
FOHDQ
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.

Setting the clock

When the appliance is connected for the first time or after a 0
power cut, the symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.

Setting the timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is
active.
Setting procedure
S
Press the Timer button.
1. S
The symbol flashes.
Use the - or + button to change the timer duration.
2.
Default value for + button = 10 minutes
Default value for - button = 5 minutes
The timer starts after a few seconds. The
the display. You will see the time counting down.
When the time has elapsed
A signal sounds. Press the
84
K
PLQ
NJ
0
S
symbol lights up in
S
Timer button. The timer goes out.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.

Rapid heating

With rapid heating, the oven reaches the temperature selected
particularly quickly.
Use rapid heating for temperatures above 100 ºC.
To ensure even cooking of your food, only place the food in the
oven after rapid heating has completed.
Set the function selector to
1.
Set the temperature selector to the desired temperature.
2.
The indicator light above the temperature selector lights up.
The oven heats up.
button
After rapid heating has completed
The indicator light goes out. Place your dish in the oven and
select the desired type of heating.
Setting procedure
Press the
1.
12.00 appears in the display and the
2. Use the + or - button to change the clock.
After a few seconds, the time is saved. The
out.
Changing from summer to winter time, for example
0
Press the
+ or - button.
Changing the timer duration
S
Press the
time.
Cancelling the setting
S
Press the
on the display.
The timer and cooking time count down at the same time
Both symbols light up. You can see the timer duration counting
down in the display.
To call up the
clock: 0
Press the
appears.
The value you are checking appears for several seconds on the
display.
I
.
0
Clock button.
Clock button twice and change the time using the
Timer button. Use the + or - button to change the
Timer button. Press the - button until zero is shown
x
remaining cooking time,
Clock button repeatedly until the relevant symbol
0
symbol flashes.
0
symbol goes
0
y
end time or