Using High-Performance Blender Hanno - Springlane Hanno Mode D'emploi

Stepless speed control
Turn the control knob from level 1 to
level 5 to get different speeds.
• High speed: turn the controller dial
to "5".
• Low speed: turn the controller dial to
"1".
Auto-clean function
This clean mode helps cleaning out
sticky food inside the jar. Detergent can
be used when necessary.
• To avoid the foam overflow fill water
in the jar no more than 800 ml.
• Turn the knob into this location, the
blender will be working with clean
mode.
• After machine stop, wash the jar
simply again with water.

USING HIGH-PERFORMANCE BLENDER HANNO

1. Prepare your ingredients following
the recipe. Particularly heavy or
hard ingredients should first be
chopped up before adding them to
the mixer container.
2. Place the device on an even and dry
work surface.
3. Place the container on the motor
base. Ensure that it is correctly
secured. To activate the securi-
ty mode, the handle needs to be
positioned to the front right when
putting on the container; otherwise,
the device cannot start.
4. Remove the lid and add your ingre-
dients to the container. We recom-
mend adding solid ingredients first
and liquid ingredients afterwards.
31