Flip Function; Rotor Replacement - ACME Razor zoopa Q 650 Manuel D'utilisation

360° Flip Function
The model offers a flip mode. Make sure that you have enough free area and that the model has
gained sufficient height to perform this.
To access the 360° flip mode, please activate the shown switch.
The model can now be controlled into the flip by overdriving the axes.
Please only perform this step if you are familiar with RC models and if the model has gained sufficient
height of minimum 2 meters.

Rotor replacement

Changing a rotor is done quickly.
Pull off the cap on the center of the rotor and turn out the screw with the supplied tool. Now pull out the
rotor from the axis.
Make sure you re-mount the correct rotor, as these differ from their direction.
www.ACME-online.de
ACME the game company