.
Inserting and connecting the battery
When the battery is fully charged, you can insert it inside the battery case on the bottom of the zoopa
Q model.
Connect the female cable (port) of the zoopa Q model with the battery cable (plug).
Pay attention on the polarity of the battery when you connect it to the model !
Switch on the controller. The Power LED on the remote control starts to blink.
Place the zoopa Q on a plain surface.
Beginner and professional mode
You can choose between 4 different beginner and professional modes. In beginner mode, the
quadrocopter flies with reduced stalling angle. You can slowly test all modes here. The remaining
modes make the models faster and more agile.
Press the upper left button during flight to change the mode.
The controller confirms a mode change with a beep sound.
1 – Beginner
(60% deflection / motor performance)
2 – Beginner Plus (70% deflection / motor performance)
3 – Advanced
(80% deflection / motor performance)
4 – Professional
(100% deflection / motor performance)
www.ACME-online.de
ACME the game company