Oregon Scientific BAR122HGN Mode D'emploi page 17

Trouble Possible Cause
The added Remote Selected Channel
sensor is not read is already used by
by main unit another Remote
sensor
(1)The measurement
Displayed Tempera-
method is different
ture and/or humidity
(2)The area under
data are different
evaluation is different
from other measur-
ing instruments or being influenced
by climate
The weather forecast Batteries of the Main Unit
icon never changes
are being discharged
Comfort level icon is Temperature and humid-
ity are out of valid range
not displayed
- Clock time is not The clock radio signal
is not received be-
correctly set;
cause:
and/or
- Electromagnetic in-
- Reception icon
terfer ence exist, or the
Main Unit is located
"Antenna" displays
within re inforced con-
as "No reception"
crete wall or shadowed
area location
- Orientation of place-
ment is not at optimum
posi tion for reception
of clock radio signal
P/N:086L002706-173 REV1
17/99
BAR122HGN_UM_EN.indd 16
All manuals and user guides at all-guides.com
Remedy
Select another free
channel via the Chan-
nel switch. Then reset
the Remote Sensor and
activate SEARCH mode
in the Main Unit
(1)Use the same
instruments with
consideration of the
tolerance of readings
(2)Place the 2 instru-
ments very closely
for a time period (no
less then 30 minutes),
avoiding direct light
and air movements
Replace with mew bat-
teries
Please refer to User's
Manual
- Locate the Main Unit
far from PC, mobile
phone etc and re-lo-
cate it near the window
sill. Wait at least 24
hours (note: during
night-time sig nal is
less attenuate particu
larly after raining)
- The clock radio signal
is searched at 1:00, 2:00,
3:00, 9:00, 15:00, 21:00
every day automatically
- To force the signal
reception please refer
to instructions in the
User's manual
16
2/26/08 9:39:45 AM