Oregon Scientific BAR122HGN Mode D'emploi page 14

HOW TO SET AND ARM THE ALARMS
The BAR122HGN has two alarms, ALARM 1 and ALARM
2. They can be invoked together or independently.
To set an alarm:
1.
Press [
to select ALARM 2. T
will be displayed. If you have never set the alarm
before, the time will be displayed as 0:00.
2. Press [
digits will blink.
3. Enter the hour using [ TIME /
4. Press [
5. Enter the minutes using [ TIME /
6. Press
[
alarm chosen will be displayed indicating the alarm
set above is now armed.
You can also arm or disarm an alarm by pressing the
[AL CLOCK] button.
When an alarm is armed, it will go off at the set time.
The four-step crescendo function allows the alarm to start
off gently and step up its intensity. Without interruption,
the alarm will go off for a total of two minutes.
If a second alarm goes off when the first alarm is sounding
off, the first alarm will be disabled automatically.
HOW TO STOP AN ALARM
To stop an alarm, you can use either press [
P/N:086L002706-173 REV1
14/99
BAR122HGN_UM_EN.indd 13
All manuals and user guides at all-guides.com
] once to select ALARM 1 or again
he last selected time of the alarm
] for three seconds. The hour
] and [ TIME /
] . The minute digits will blink.
] and [ TIME /
to exit. The [ ] icon for the
]
] or [ AL CLOCK ] or [ SNOOZE ] button.
Pressing [
alarm, which is still armed and will activate at the set
time the following day.
If [ SNOOZE ] button is pressed to turn off the alarm
sound, the alarm will activate again after 8 minutes.
PRECAUTIONS
Do not subject the unit to excessive force, shock,
•
dust, temperature or humidity.
]. Do not cover the ventilation holes with any items such
•
as newspapers, curtains etc.
]. Do not immerse the unit in water. If you spill liquid
•
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
•
materials.
Do not tamper with the unit's internal components.
•
This invalidates the warranty.
Only use fresh batteries. Do not mix new and old
•
batteries.
Images shown in this manual may differ from the
•
actual display.
When disposing of this product, ensure it is collected
•
separately for special treatment.
Placement of this product on certain types of wood
•
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture
13
] or [ AL CLOCK ] will stop the
2/26/08 9:39:44 AM