Maintenance; Spare Parts And Accessories; Warranty - Invicon Precision Dispenser 100 Mode D'emploi

6.

MAINTENANCE

The dispenser is designed and built to be relatively
maintenance free. To assure trouble free operation, the
following recommendations should be followed:
◾
Make certain air supply is clean and dry.
◾
Avoid turning barrels upside down or laying barrel
so that material may run through air line to internal
components.
◾
Avoid connecting the unit to excessive moisture or
solvent saturation.
◾
Avoid connecting air supply exceeding 100 psi (6.9
bars) for the 200/200 and 15 psi (1.03 bars) for the
200/100 .
◾
Use only Amyl Alcohol to clean outside surface of the
main housing.
◾
Use only soft cloth to clean the LCD.

6.1 Spare parts and accessories

For 100 spare parts and accessories information, please visit
the 100 User Guide webpage at www.okinternationals.com
6.2 Limited warranty
IInvicon warrants this product to the original purchas-
er for a period of one (1) year from date of purchase
to be free from material and workmanship defects but
not normal wear-and-tear, abuse and faulty installa-
tion. Defective product or subassembly and compo-
nents under warranty will be repaired or replaced (at
OK International's option) free of charge. Customer
with defective product under warranty must contact
the nearest Invicon office or distributor to secure a
return authorization prior to shipping the product to
the assigned Invicon authorized service center. For
nearest Invicon office or distributor contact informa-
10 | invicon product insert
10 | invicon Product insert 100 Precision dispenser Precision Despenser 100
tion, please visit www.invicon.at. Invicon reserves the
right to make engineering product changes without
notice.