Miele CSAD 1300 Mode D'emploi page 9

Warning and Safety instructions
Installation instructions
Installation of several appliances
All manuals and user guides at all-guides.com
~
The CSAD 1400 lid must not be used in conjuction with
the CS 1421 (Salamander) or the CS 1028 G (Wok)
CombiSet appliance.
~
Do not switch the appliance on when the lid is lowered as
this will result in heat damage.
~
Do not use the CSAD 1300/1400 lid as a resting place for
any other objects.
~
Australia and New Zealand only
Do not remove the warning labels as failure to follow the
directions given may result in personal injury and damage to
the appliance.
Only lower the lid when the appliance has cooled down
and the residual heat indicator (if applicable) has gone
out.
Screws are supplied for securing the lid. If it is not possible
to secure the lid using screws, e.g. for natural stone
worktops, adhesive can be used instead.
When installing several appliances using the CSZL 1500
– a filler panel c must be fitted between the worktop and
the lid (see diagram), and
– a rubber buffer d must be stuck onto the front of the outer
appliances.
Example for three appliances:
gb
9