Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Switching on and off (fig. A)
The appliance is equipped with a thermostat
that keeps the grill rack at the required
temperature.
• To switch on the appliance, insert the mains
plug into the wall socket.
• Turn the thermostat dial (1) to set the
required temperature. The temperature
indicator (2) remains on while the thermostat
heats the heating element (4). The
temperature indicator (2) goes off when
the heating element (4) has reached the
required temperature.
• While the appliance is switched on, the
temperature indicator (2) will illuminate and
extinguish as the thermostat switches the
heating element (4) on and off to maintain
the required temperature.
• To switch off the appliance, remove the
mains plug from the wall socket.
Setting the temperature (fig. A)
• Turn the thermostat dial (1) clockwise to
increase the temperature of the grill rack (3).
• Turn the thermostat dial (1) counter clock
wise to decrease the temperature of the
grill rack (3).
Hints for use
• Prepare the ingredients.
• Clean the grill rack with a damp cloth.
• Place the appliance on a stable and flat
surface.
• Fill the water reservoir with water up to
the maximum mark on the water level
indicator (fig. C). Do not exceed the maximum
mark when you fill the water reservoir.
• Insert the mains plug into the wall socket.
• Turn the thermostat dial to set the required
temperature.
• Wait for 10 minutes until the temperature
indicator goes off. The grill rack has reached
the required temperature.
• Note: Small pieces will grill or fry better and
more quickly than large pieces.
• Set the thermostat to suit the ingredients.
Experiment with the required cooking time
and the required temperature to achieve
the best results.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
Do not use aggressive or abrasive cleaning
agents to clean the appliance.
Do not use sharp objects to clean the
appliance.
• Regularly check the appliance for possible
damage.
• Clean the appliance after each use:
Remove any residues with a paper towel.
Clean the grill rack with a damp cloth.
Thoroughly dry the grill rack.
Clean the heating element with a damp
cloth. Thoroughly dry the heating element.
Clean the appliance with a damp cloth.
Thoroughly dry the appliance.
• Store the appliance in a dry place, out of
the reach of children.
U.K. Wiring instructions
The wires in the mains lead are coloured in
accordance with the following code:
BLUE
NEUTRAL
BROWN
LIVE
GREEN/YELLOW
EARTH
As the colours of the wire in the mains lead
of this appliance may not correspond with the
colour markings identifying the terminals on
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter L or coloured red.
The wire which is coloured GREEN/YELLOW
must be connected to the terminal which is
marked with the letter E or (
coloured GREEN or GREEN/YELLOW.
11
) and is
Publicité
