Energy Saving Mode - Bialetti BREAK CF67 Instructions D'emploi

EN

8. Energy saving mode

This device has been designed in accordance with European directives
EC1275 /2008 and 2009/125/EC providing requirements for energy-
saving mode.
This device integrates a stand-by function which is enabled after 9 minutes
of inactivity: the machine is turned off and the power consumption in
this state is less than 0.5W.
To restart the machine it is necessary to press the power switch (2)
located on the back of the right panel of the product: the machine will
start the pre-heating of the boiler (red LED) and once it reaches operating
temperature, it will indicate the ready state (green LED).
TIME OF PRE-HEATING IS BASED ON THE INACTIVITY TIME OF THE
MACHINE AND THE AMBIENT TEMPERATURE, AND CAN LAST UP TO 50
SECONDS IF THE PRODUCT HAS NOT BEEN USED FOR A FEW HOURS.
THE MACHINE WILL ENTER STAND-BY MODE AUTOMATICALLY AFTER 9
MINUTES EVEN IF NOT BREWED ANY COFFEE.
41