eMachines H5088 Guide De Référence page 60

All manuals and user guides at all-guides.com
7
Locate the old battery on the system board and note
its orientation. You will need to install the new battery
the same way.
below.
8
Push the battery release tab. The battery pops out of
the socket.
9
Make sure that the positive (+) side of the new battery
is facing up (usually the side that the battery type and
model number are etched into), then press the battery
into the socket until it snaps into place.
10
Replace the side panel by following the instructions in
"Replacing the side panel" on page
11
Reconnect all external cables and the power cord.
12
Turn on your computer.
13
While your computer starts, press and hold the F1 key.
The main menu of the BIOS Setup utility opens.
14
In the BIOS Setup utility, restore any settings that you
wrote down in
15
Save all your settings and exit the BIOS Setup utility.
Replacing the system board
To replace the system board:
1
Remove the side panel by following the instructions in
"Removing the side panel" on page
2
Remove all expansion cards by following the directions
in
54
Chapter 4: Upgrading Your Computer
Important
Your computer's battery location may vary from the illustration
Step 3.
"Adding or replacing an expansion card" on page
Battery release tab
38.
35.
52.