eMachines H5088 Guide De Référence page 52

All manuals and user guides at all-guides.com
7
Remove the cables from the cable clip on the bottom
of the case.
8
Remove the media panel from your computer.
9
Guide the cables of the new media panel through the
hole in the front of the case, then slide the new media
panel into place.
10
Secure the media panel with the screw you removed
previously, then snap the panel's bezel into place.
11
Plug the cables into the system board, then secure them
under the cable clip on the bottom of the case.
12
Reinstall the front bezel by following the instructions in
"Replacing the front bezel" on page
13
Reinstall the computer case's side panel by following
the instructions in
page
46
Chapter 4: Upgrading Your Computer
"Replacing the side panel" on
38.
Cable clip
37.