Making ice cubes
Fill the ice cube tray (not supplied) with 3/4 full of drinking water and place in
the freezer.
If the ice cube tray is stuck to the freezer, loosen with a blunt tool only.
To loosen the ice cubes, twist the ice cube tray slightly or hold briefly under
flowing water.
Operating noises
Normal noises
•
Motors are running.
•
Refrigerant is flowing through the tubing.
Energy saving tips
•
The freezer should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing in the freezer.
Overloading the freezer forces the compressor to run longer. Foods that
freeze too slowly may lose quality, or spoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them
in the freezer. This cuts down on frost build-up inside the freezer.
•
Freezer storage bin should not be lined with aluminum foil, wax paper, or
paper toweling. Liners interfere with cold air circulation, making the freezer
less efficient.
•
Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon
as possible.
52
PLCH206 IB.indd 52
PLCH206 IB.indd 52
4/3/2022 12:01 PM
4/3/2022 12:01 PM