Publicité
Les langues disponibles
Les langues disponibles
READ THIS OPERATION MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future
reference.
Choke
Control
Throttle
Control
Fuel Valve
Air Filter
Lever
Multi-
Adjustable
Spray Wand
High
Pressure
Pump
PRESSURE WASHER
High Pressure Pump (located inside
the shroud): Increases the pressure of
the water supply.
Engine: Drives the high pressure
pump.
High Pressure Hose: Carries the
pressurized water from the pump to
the gun and spray wand.
Spray Gun: Connects with spray wand
to control water flow rate, direction,
and pressure.
Multi-Adjustable Spray Wand: Allows
the user to use high or low pressure
and adjusts from a pencil stream (0°)
to a wide angle fan spray (40°). See
How To Use Wand instructions in this
section.
A04546
All manuals and user guides at all-guides.com
OPERATION
Spray
Gun
Hand
Grip
Chemical Injector Rinsing Hose (not
shown): Rinses the chemical injector
after use of cleaning solution.
Dual Tank Cleaning System: Allows
easily switching from one cleaning
solution to another depending on the
cleaning task by simply turning the
control valve knob.
ENGINE
Choke Control: Opens and closes
carburetor choke valve
Throttle Control Lever: Controls
engine speed.
Starter Grip: Pulling starter grip
operates recoil starter to crank engine.
Fuel Valve Lever: Opens and closes
connection between fuel tank and
carburetor.
10- ENG
High
Pressure
Hose
Dual Tank
Cleaning
System
Engine
Publicité
