GE 28128 Serie Mode D'emploi page 37

NoTE: To set the speed dialing number, refer to section "Phone
Book -> Adding the Speed Dialing Number".
Cellular Calls
1. In standby mode, dial the desired number, press Cell (SKR) button.
- OR -
Use the
button.
- OR -
Press and hold the number key to get the corresponding speed dialing number.,
then press Cell (SKR) button.
NoTE: If more than one Bluetooth cell phone device is connected,
use the
. Press Select (SKL) button to confirm.
. Press END/cancel button when finished.
Chain Dialing from Memory
Use this feature to make calls from records stored in memory which require a
sequence of numbers, such as a calling card number used for a frequently called long
distance number.
1. Make sure the phone is oN (in talk mode) by pressing the TALK/CALL BACK or
SPEAKER button for landline or the Cell (SKR) for a cellular call.
. Press the
. Use the
4. Press the Dial (SKR).
5. When you hear the access tone, press the
6. Use the
7. Press the Dial (SKR).
a
nswerIng a
Check the display to see who is calling.
Landline Calls
1. Pick up the handset, and press the TALK or SPKR button on the handset.
- OR -
Press the SPEAKER button on the base.
. When finished, press the END/cancel button on the handset or base, or place the
handset in the base cradle.
Get user manuals: See SafeManuals.com
or or button to select the desired record, then press Cell (SKR)
or button to select the desired device.
button.
or button to select the desired record.
or button to select the desired access record.
c
all
button.
7