GE 28128 Serie Mode D'emploi page 19

NoTE: If you select ToLL SAVE, the unit answers after the 3rd ring
if there are NEw messages in the answering system, or the unit
answers after the 6th ring if there are No new messages. Then, when
you access the answering system from another remote location, you
may hang up after 5 rings to save long distance charges.
Message Length
This option allows you to set the duration for the memo or incoming message
recording.
from the Answerer menu:
1. Use the
. Press the Select (SKL) button to enter the submenu.
. Use the
Limit. The default setting is 3 minutes.
4. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
NoTE: The total recording time of this unit is 15 minutes.
a
larm
Set an alarm, then program the snooze time, occurance, and melody preferences.
1. Make sure your base is off (not in talk mode).
. Press the Menu (SKL) button to enter the main menu.
. Use the
4. Press the Select (SKL) button to enter the submenu, Alarm On/Off shows on the
display.
5. Use the
6. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
Set Alarm Time
NoTE: Alarm must be activated to set time.
from the Alarm On menu:
1. Press the Select (SKL) button to enter the menu. Set Alarm shows on the display.
. Use the number keys to enter the time, then use the
AM or PM. The default setting is 12:00AM.
. Press the Select (SKL) button to save your setting. You will hear a confirmation tone.
Get user manuals: See SafeManuals.com
button to scroll to Message Length.
or
button to scroll and select from 1 minute to 3 minutes or No
or
button to scroll to Alarm.
or
button to scroll to On or Off.
or
or button to select
19