GE 28128 Serie Mode D'emploi page 15

4. Plug the AC power converter into the electrical outlet and the DC connector into
the jack on the bottom of the base.
5. Place the handset in the base cradle. The CHARGE IN USE indicator turns on,
verifying the battery is charging.
After the Handset and Base have been powered up, the base displays the Date/
Time set up screen for entry. You MUST enter the date/time prior to operating the
unit.
6. Use the number keys to enter the year and the date.
7. Press the Next (SKL) button to move to Set Time menu.
. Use the number keys to enter the time and use the
to select AM or PM.
9. Press the Store (SKL) button to save the settings. You will hear a confirmation tone.
10. Allow the phone to charge for 16 hours prior to first use. If you don't properly
charge the phone, battery performance is compromised.
w m
all
1. Turn the base over.
. Attach the wall mounting pedestal by first inserting the tabs on the open edge of
the pedestal into the slots on the lower portion of the bottom of the base. Then
push down and snap the pedestal into place.
. Slip the mounting holes (on the back of the base) over the wall plate posts, and
slide the unit down into place. (Wall plate not included.)
NoTE : If desired, gather the extra telephone line and power
adaptor cord and store inside the wall mounting bracket.
ANSwErING SYSTEM SETUP
This section shows you how to set up your answering system to receive incoming
calls.
s
ettIng the
The voice prompt language on the base is the same as the display prompt language
on the base. If you select Spanish as your voice prompt language on the base, the
display prompt language will also be Spanish. The default prompt language is English
NoTE: The voice prompt language of the handset is determined by
the voice prompt language set on the base. However the handset
display prompt is set oNLY through the handset.
Get user manuals: See SafeManuals.com
ountIng
V p
oIce rompt
or
l
anguage
button
15