GE 28128 Serie Mode D'emploi page 35

remote Access from Another Location
You can access your answering system from any touch-tone phone by entering your
-digit security code during the playing of outgoing announcement or after you hear
the outgoing announcement.
1. Dial the telephone number to which the answering system is connected.
. Enter the security code during the outgoing announcement or after you
hear the tone.
. Follow the voice menu to use the answering system 's remote functions.
m
emory
When answering system memory is full, the system answers after 10 rings, beeps and
waits for you to enter the -digit security code. If you don't enter the security code
within  seconds, the phone hangs up.
You should erase some messages so the answering system can record new
messages.
NoTE: The unit also answers after the 10th ring if it is turned off. To
access the answering system, enter your 3-digit security code after
you hear the beep.
TELEPHoNE oPErATIoN
V
Isual
CHArGE/IN USE Indicator on the Base
The CHARGE/IN USE indicator is lit when the phone is in use or a handset is charging
in the base charge cradle. It flashes when you receive a call.
TALk Indicator and SPkr Indicator on the Handset
The TALK Indicator or SPKR Indicator is lit when the handset is in use. It flashes when
you receive a call.
VMwI Indicator on Handset and the Base
IMPorTANT: In order to use this unit's Visual Message waiting
Indicator (VMwI) feature, you must subscribe to this service from
your phone company.
The VMWI indicator on the top of the handset or VOICE MAIL indicator on the base
flashes when you receive a new message from your service provider.
Get user manuals: See SafeManuals.com
f
ull
I
ndIcators
5