Publicité
Les langues disponibles
Les langues disponibles
15.3.1
To program the 2nd alarm:
1.
Go to Configuration > Alarm 2 > Turn On.
2.
Repeat steps from program an alarm.
15.3.2
To program NAP alarm:
1.
Go to Configuration > NAP Alarm
2.
NAP Alarm switches the radio on after the programmed period of time is over.
3.
Choose between Off, 5 Minutes, 10 Minutes, 20 Minutes, 30 Minutes, 60
Minutes, 90 Minutes and 120 Minutes.
15.3.3
Set Alarm volume:
1.
Go to Configuration > Alarm volume.
2.
Use navigation keys left/right to adjust alarm volume.
15.4 Language
Refer to page 13 for details about language selection.
15.5 Dimmer
The Configuration > Dimmer option allows you to adjust the brightness of the light.
You can also shift the light mode by pressing the light button on the remote control.
Two modes are available:
•
Power Saving: With this option the display gets dimmed after 15 seconds without
command. When a command from the remote control is received the light is turned back
on automatically. You can select how much the backlight shall be dimmed.
•
Turn On: Select to turn the light always on.
12:00PM
-
+
26
Publicité
