Albrecht DR 460-W Manuel D'instructions page 50

11.2 Language selection
The DR 460-W supports up to eight languages for the menu options.
To change the language:
1. From the main menu, select Configure > Language .
2. Press the up/down navigation button to scroll through the language
options and press the enter button to apply the selected language.
3. Or simply press the LANG button on the remote and cycle through the
available languages.
03:00
Alarm
Language
Dimmer
< 5/12
NOTE : The language selected applies to the DR 460-W menus and system messages
only. The station names shown vary according to the different station locations.
11.3 Text entry
When you add the address of an online radio station or use a WEP key for
wireless network security, you need to enter text. It is the same procedure to set
the time, date or the alarm. But of course you can only select numbers.
To enter upper/lower case letters, symbols, or numbers:
1. Press the up/down navigation button to select a character from the
following: A a B b...Z z $ % & # _ ^ ~ ` " ', . : ; ? ! * - + @ < = > { ¦ } [ \ ] ( / )
0 1...9
2. Press the right navigation button to proceed to the next. Press the enter
button when done.
NOTE: When entering numbers the numeric keys on the remote control can also be
used.
English
Deutsch
Español
>
<
03:00
1/6 >
13