Delivery Scope; Intended Use; Technical Data; Noise/Vibration Information - Bosch Uneo Notice Originale

OBJ_BUCH-1695-004.book Page 12 Friday, September 2, 2016 3:45 PM
12 | English
Symbol Meaning
Movement direction
Reaction direction
Next step of action
Prohibited action
Screwdriving
Drilling without impact
Hammer Drilling
Switching On
Switching Off
Low speed/impact rate
High speed/impact rate
Right/left rotation
Battery Charge Indicator
Tool holder
Apply a light coat of grease to the shank
end of the application tool
U Rated voltage
E Impact energy per stroke according to
EPTA-Procedure 05/2009
No-load speed
n
0
M Maximum torque according to
ISO 5393
Wood
Steel
Concrete
Brickwork
Ø Drilling diameter, max.
1 609 92A 351 | (2.9.16)
Symbol Meaning
Ø Max. screw dia.
Weight according to
EPTA-Procedure 01:2014
L Sound power level
wA
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty
T Permitted ambient temperature during
1
charging
T Permitted ambient temperature during
2
*
operation and storage
* limited performance at temperatures
<0 °C
Recommended batteries
Recommended chargers

Delivery Scope

Cordless Rotary Hammer.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The power tool is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact in
wood and metal, as well as for screwdriving.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Technical Data

The technical data of the machine are listed in the table on
page 191.

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 191.
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
Bosch Power Tools