OJ Electronics EXcon HMI Touch Manuel D'instructions page 3

Les langues disponibles

All manuals and user guides at all-guides.com

LIST OF FIGURES

Fig. 1: Installation on flat surface

Fig. 2: Removing the front cover

Fig. 3: Removing the back cover

Fig. 4: Dimensioned drawing to facilitate installation in wall box or

panel front

Fig. 5: Connecting Modbus via the RJ12 6P4C port

Fig. 6: Connecting Modbus via the screw terminals

INTRODUCTION

EXcon HMI Touch is a touchscreen panel with user-friendly graphi-

cal user interface specially developed for controlling ventilation

systems. The panel communicates with the Excon system via a

Modbus interface, ensuring easy installation.

PRODUCT PROGRAMME

Product

EXcon HMI Touch

OPERATION

If the screen saver is active, sim-

ply touch the screen once to open

the home screen.

This screen provides access to

elementary functions such as fan

speed, temperature and setup.

The time and day of the week

are shown in the top line of the

screen. Below these, an alarm

bell is visible if an alarm has been

activated. The house in the mid-

dle section of the screen provides

access to a simple overview of

temperatures, air volumes and

filter pressures. The temperature

EXcon HMI Touch

English

Type

3.5" touchscreen panel