Télécharger Imprimer la page

Klarstein BIGBITE Mode D'emploi page 36

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
36
Replacing E14 bulb
Switch off the device immediately and pull the power plug out. Remove the light
cover by unscrewing the 2 screws. Unscrew the light bulb. Replace with a bulb of
the same type and wattage.
Replacing the LED light
Switch off the device immediately and pull the power plug out.
Locate the location of the lamp brackets.
On some models you need to remove the grease filters to find the lamp
holders. On some other models, the lamp holders are covered by a light
screen. Unscrew the light screen before replacing.
Remove the screws on the LED board and brackets, separate and carefully
insert the new light.
For round LED lights
Note: Remember to reassemble everything after replacing the new lamp and
fix all screws in the same position. Always replace the light with the same type
and amperage.
For LED lights with light screen

Publicité

loading

Ce manuel est également adapté pour:

10045552100455531004555410045555