Publicité
Les langues disponibles
Les langues disponibles
•
The angle of the bend of the exhaust air pipe should not be less than 120°.
Align the pipe horizontally. Alternatively, the pipe should go up from the
starting point and be led to an outer wall.
•
After installation, make sure that the cooker hood is horizontal in order to
prevent grease from collecting on one side.
•
Make sure that the exhaust duct selected for installation complies with the
relevant standards and is fire resistant.
Installation of the sloping hood
Borehole
Dowel
Holder
Drill 3 x 8 mm holes for the wall bracket. Fix the wall bracket to the wall with
the supplied dowels and screws.
Screws
(4 mm x 30 mm)
Lift the extractor hood and
hang it on the wall bracket.
EN
27
Publicité
