Allmatic SER Serie Mode D'emploi page 17

CONNECTION DRAW OF: SER + PUSH-BUTTON + KEY SELECTOR
B = Electrobrake
G = Earth
If SER is required complete with electrobrake, the connection of the electrobrake to the
motor is made in factory.
To connect SER to a control board, consult the control board instructions.
In the draw you can see how connect the push button for the opening and closing control on
the inside of the premises and of the key selector for the external control.
CONNECTION DRAW OF: 2 SER + PUSH-BUTTON + KEY SELECTOR
B = Electrobrake
G = Earth
6-1624000 REV. 11 DEL 13/12/2022
LN = Line 1-Phase
M = Motor
LN = Line 1-Phase
M = Motor
KEY-SELECTOR
green / yellow
G N L
U
= Common
V/W = Inverters
IMPORTANT: Use proper push button and key selector.
TRANSMITTER AND PHOTOCELLS:
- ALLMATIC can supply electronic control board for the remote control through transmitter,
push button, key selector;
- The control board can also be arranged or the connection of safety photocell.
KEY-SELECTOR
green / yellow
G N L
U = Common
V/W = Inverters
17
close
PUSH-BUTTON
open
8
close
PUSH-BUTTON
open
9
G
B