DeWalt DW030 Mode D'emploi page 45

All manuals and user guides at all-guides.com
• Always set up the laser at a position where the laser beam cannot
cross any person at eye level. Be extra alert for the presence of
stairs and specular surfaces.
residual risks
The following risks are inherent to the use of this device:
– injuries caused by staring into laser beam.
markings on tool (fig. 1)
The following pictographs are shown on the tool:
Read instruction manual before use.
Laser warning.
Do not stare into the laser beam.
Protection class: IP54.
date code Position
The Date Code, which also includes the year of manufacture, is printed
on the inside of the battery compartment.
=
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT POWER
<1mW@620nm-690nm
IEC60825-1:2007
english
43