Publicité
Install net (43).
9.
1.
Roll completed assembly to desired position. Fill tank with water (approx.
10.
34 gallons (129 Liters)) or sand (approx. 300 lbs. (136 kg)) and rotate the
cap (41) into base (1).
Cap (41) MUST be tightened COMPLETELY and SECURELY to prevent leakage.
2.
CHECK WATER LEVEL BEFORE EACH USE!
41
1
3.
WARNING!
27
4.
WARNING!
DO NOT LEAVE ASSEMBLY
UNATTENDED WHEN EMPTY;
IT MAY TIP OVER.
CAUTION!
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
IF USING SAND: 2 GALLONS
OF ANTI-FREEZE IS NOT
REQUIRED
02/07
ID# M6611541
Publicité
