HOESCH SenseEase Instructions De Planification, De Montage Et D'utilisation page 13

Volume ↑
15
Downward UKF station search.
Select last track (in MP3 player).
11
Upward UKF station search.
Select next track (in MP3 player).
12
* - Bluetooth is automatically activated with the activation of the control panel. To pair your control panel with an external MP3 player
follow the instructions specifi c to an external device (eg. smartphone, tablet, etc.). In order to connect the devices use individual pin
code included on page 2 of manual instruction.
04.02 Fittings
Faucet knob devides water stream to chosen outlets. The knob serves to open and close the water and regulate water presure.
1
– showerhead/back jets on
A
– hand shower on
B
Faucet knob serves to set temperature. Turning without pushing the control button regulates water
2
temperature in range up to 38°C (burn protection function)
Turning with the control button pushed regulates water temperature in range over the 38°C
Regarding the possibility of burning it is recommend to use temperature up to 42°C.
The calibration of thermostatic valve in case of faulty temperature regulatio should be done at 38°C
based on the following indications:
■ start manual shower funktion setting the knob at 38°C
■ measure the water temperature with the normal thermometer
■ mark with a line 38°C temperature inthe panel as marked in the shower
knob
■ push the red button and slowly turn the knob until 38°C temperature of
water stream is reached
■ take the cap off, unscrew the bolt and pull out the knob
■ install the knob in a way that the panel is in the same place as 38°C
temperature mark in the knob
■ screw the bolt and put the cap
In order to remain entitled to repairs under
the guarantee and to keep the shower panel
looking good, you should do the following:
remove sediment and impurities regularly
from the screen.
04.03 Steam Generator Clean-
ing
The cleaning process is performed
automatically after the steam bath and
indicated by the ` - ´ symbol fl ashing in
display [W1]. The steam generator is
emptied, fi lled and emptied again. The
cleaning process takes 5.2 minutes. The
steam function is blocked during the cleaning process.
04.04 Steam Generator Decalcifi cation
⚠
Don't open the fi lling door while enjoying a steam bath. For your safety we
recomment to wait at least 30 minutes after using a steam bath till the cabine
cools off.
[W1] + [W2] flash
- the steam generator has been operating for 18 working hours, the system needs to be
decalcifi ed!
Symbol „00" flashes in display [W1]
- the steam generator has been operating for 20 working hours and the steam function is
blocked. The system needs to be decalcified
For decalcifi cation, pour in 250ml of the liquid decalcifi er (i. e. HOESCH special softening agent
Art.Nr. 692101) and activate the process by keeping button 5 pressed for 10 seconds.
The decalcifi cation process can not be interrupted and is indicated by the symbol „00" appers in display [W1].
Decalcifi cation process duration = 65 minutes
All manuals and user guides at all-guides.com
A
1
B
2
13
GB