Publicité
Les langues disponibles
Les langues disponibles
- warning! Hot surface!
⚠
Silicone must be provided by building constructor. Please keep in mind that maintenance joints may require cleaning.
02
Equipment
■
Back walls silver made of toughened safety glass with EverClean coating.
■
Frameless glazing made of toughened safety glass with EverClean coating.
■
Roof and shower tray (optionally) made of sanitary-grade acrylic (PMMA), with GRP-reinforcement on the back.
■
Column made of aluminium.
■
Integrated control panel.
■
Steam generator 3.3 kW, with semi-automatic cleaning nominal voltage 230 V, 50/60 Hz.
■
Steam nozzle.
■
Fittings (chrome-plated) consisting of:
hand shower, rain shower, 6 adjustable back jets with scottish massage, thermostat ½", 1 closing valve.
■
Rain shower and back jets electronically operated
■
Sound Module: Bluetooth, Radio, 2 speakers
■
2 LED spot lights with automatic colour changer.
■
Folding seat made of PU (black)
02.01 Fittings technical data
■
Recommended fl ow pressure:
■
Hot water temperature:
■
Recommended hot water temperature:
■
Temperature range:
■
Safety cut-off:
02.02 Steam generator technical data
Steam generator
Voltage
Fuse protection
Line cross section
Water connection (Cold Water + Hot Water)
Steam output
⚠
Caution! This product contains strong magnets! Working function of a cardiac pacemaker could be effected!
03
Caring for the steam bath/shower cabin
After showering/steaming, rinse the tray and wall element surface with water and wipe down with a damp cloth. Do not use scouring
agents! For occasional thorough cleaning, use a few drops of cleaning agent, e.g. Hoesch Cleaner (item no. 6999 00), on the surface
and rub with a soft, dry cloth. Remove heavier soiling using warm water and liquid cleaning agent or a soap lye. Wipe away scale
deposits using vinegar and water (avoid contact with the fittings!). Observe the manufacturer's instructions if using drain cleaners!
Remove slight scratches or rough areas in glossy surfaces with the Hoesch Sanicryl care set (item no. 699100, follow instructions!).
Remove deep scratch marks or burns on glossy or matt surfaces using fi ne sandpaper (no. 800-1500) or a fi ne steel wool metal eraser
by rubbing carefully in one direction in a large area around the scratch. Treat glossy surfaces only with special polishing cream.
03.01 Caring for the glass panes and profi les
■
After showering, quickly rinse the partition with clean water.
■
Use only a damp rag (never dry) to wipe down the panels and frame. You can also use a squeegee to dry the panels.
■
Only use gentle cleaners such as a weak vinegar and water solution. Never use cleansing powder or cleaners containing
chlorine.
■
Do not use microfi ber cloths. They destroy any coatings and may cause the glass to become scratched.
■
It is a good idea to lightly oil sliding and swinging doors so they remain easy to open.
03.02 Caring for the fi ttings
For day-to-day cleaning, use neutral or citrus-based cleaning agents only. Use cleaning agents intended for cleaning fi ttings only. Follow
the instructions for the cleaning agent!
Spray cleaning agent onto a cloth and use it to clean the fi ttings.
Rinse the fi tting with plenty of water and polish with a soft cloth.
03.03 Do not use ...
■
Scouring or scraping cleaning textiles or sponges.
■
Cleaning agents with fl uid acids such as hydrochloric or citric acid.
■
Scouring agents.
■
Cleaning agents containing chlorine bleach lye.
All manuals and user guides at all-guides.com
200-500 kPa
max. 90°C
60-70°C
20-60°C
38°C
3,3 kW
1N~230 V, 50/60 Hz
16 A
3 x 2,5 mm²
R½"
4,2 kg/h
GB
11
Publicité
