MSW Motor Technics MSW-MBS680H Manuel D'utilisation page 32

Cutting:
Set the cut element in the guide of the device - adjust the length and, if
•
necessary, the cutting angle (use the rulers on the device).
Plug the power cord into an electrical outlet.
•
Start the device with the blade away from the object to be cut and wait
•
until the blade reaches the target speed - if necessary, adjust its speed with
the knob located on the trigger.
Slowly lower the blade unit onto the workpiece, exerting a slight pressure
•
on the workpiece after the blade contacts the workpiece until the cut is
complete.
IMPORTANT: to cut metal elements do not use any liquids or other cutting
aids!