Publicité
Les langues disponibles
Les langues disponibles
Printout from PRE-
TARE memory Press
Example:
M1
0.0 kg
M2
7.0 kg
M3
10.0 kg
M4
30.0 kg
M5
50.0 kg
11.6 Print function
This action requires the RS232 interface cable available as an accessory which has
to be connected via the round plug to the rear end of the terminal.
(Loosen the two screws from the side, take off the display unit, insert the cable and
screw the display unit back on.)
Pressing the PRINT – key whilst the scales are in weighing mode will trigger a
printout of the determined data via the interface, as described in the following.
This is a standard output that cannot be modified.
Example:
G
88.8 kg
Gross weight
T
2.0 kg
Taring weight
N
86.8 kg
Net weight
180.0 cm
Size of patient
24.4 BMI
BMI value
34
PRE-
TARE
and hold until "ni" (M) appears on the display.
To issue the values saved to the 5 memories, briefly press
PRINT
the
button.
MCB_MPT-BAPS-e-1710
Publicité
