Zyxel NBG-334SH Guide De Démarrage Rapide page 4

1 Hardware Connections
Do the following to make hardware connections for initial setup.
1
WAN Connection
Connect your modem to the WAN port using the cable that came with your
modem.
2
LAN Connection
Connect your computer to a LAN port using the included Ethernet cable.
3
POWER Connection
Use the included power adaptor to connect the POWER socket to an appropriate
power source.
The LEDs
Look at the LEDs (lights). When you connect the power, the PWR LED blinks and stays on
once the device is ready.
ENGLISH
4