Zyxel NBG-334SH Guide De Démarrage Rapide page 11

If you were given Internet access settings, enter them in the following fields.
Otherwise leave the default settings and click Next.
Ethernet Connection
A Select Ethernet as your WAN connection type.
B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address.
Skip to C.
Or
Select Use fixed IP address provided by your ISP to give the NBG-334SH a static IP
address. Go to B1.
B1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address,
WAN IP Subnet Mask and the neighboring device's IP address given by your ISP.
If you are given DNS server settings, enter them in the fields. Otherwise leave the
default settings and click Next.
C Select Factory Default to use the factory assigned default MAC address.
D Select the check box to have the NBG-334SH apply bandwidth management to traffic
going out through the WAN, LAN or WLAN port according to the traffic type.
E Click Apply to save your changes.
A
A
B
ENGLISH
B1
11