Installing the SIM card
and the handset battery
Make sure the power is off before you
remove the battery.
1. Remove the battery cover.
Press the battery release latch and
slide the battery cover toward the
bottom of the phone. And remove
the battery cover.
rd
Note
Removing the battery from the
phone when the power is on may
cause the phone to malfunction.
F300_Swiss_E_1.0_0819.indd
All manuals and user guides at all-guides.com
15
Getting started
2. Remove the battery.
Hold the top edge of the battery
and lift the battery from the battery
compartment.
3. Install the SIM card.
Insert the SIM card into the holder.
Slide the SIM card into the SIM card
holder. Make sure that the SIM card is
inserted properly and that the gold
contact area on the card is facing
downwards. To remove the SIM card,
press down lightly and pull it in the
reverse direction.
Install the SIM card
Remove the SIM card
15
2008.11.7
11:24:1