Daewoo International DTD 3500 Manuel D'instructions page 32

Trouble shooting
 Ring volume too low
 Check if the ringing volume is set improper, reset it.
 Receive only
 Check if P/T mode is properly set.
 Check if you have set the barring number, if you want dial out this number, reset the barring number.
 The base can not page the handset
 Repeat the registration operations to register the base and handset again.
 If the base has registration 5 handset, you can delete one handset and registration the handset which you
need.
 Most of the functions failed
 Check if the batteries are strong enough, charge the batteries.
 If batteries are OK, remove the battery, unplug the lines and reinstall after 10 minutes.
Note: Due to continuous product development, all features and specifications are subject to change without
prior notice.
STATEMENT OF COMPLIANCE
Industrias Masats S.L.U hereby declares that the DTD-3500 product complies with the requisites and basic
safety requirements:
• EC RE TTE Directive 99/5/EC
• Low Voltage Directive 73/23/EC
• EMC Directive 89/336/EC
To check the entirely declaration of conformity of this model, visit www.electronicaflamagas.com.
All manuals and user guides at all-guides.com
32