Publicité
Les langues disponibles
Les langues disponibles
Notes:
1.
In idle state, press ▲ key to incoming records or press ▼ key to review outgoing records.
2.
During review the outgoing numbers, then press
about the current number.
Handset Menu function 3: BS SETTINGS
The user is able to change the base setting in base settings item, press OK key and use ▲ or ▼ key to
select this item. Then you can do below:
DELETE HANDSET
This function allows the user to delete a handset registration from the base.
1.
Press OK key, the first show is DELETE HS
2.
Press OK key to enter, the user will be prompted to enter the PIN code.
3.
Input the correct 4-digit pin code using digit key (default PIN code is 0000). Press OK key to confirm.
4.
Press ▲ or ▼ key to scroll the handset names list up and down.
5.
Press OK key to confirm. The delete handset will be deleted from the list on registered handset on the
base, and the handset will behave according to the out of range condition.
Note: Press and keep
IN USE/CHARGE LED flashes quickly. Then all the handsets logout the base successful till IN USE/CHARGE
LED die out.
DIAL MODE
The user can select to change the mode in which the base will dial.
1.
Press OK key, then using ▲ or ▼ key to select DIAL MODE item.
2.
Press OK key to enter.
3.
Press ▲ or ▼ key to select the TONE or PULSE dial mode.
4.
Press OK key to confirm your selection.
Note: According to your telephone lines or PABX systems you may need to change the dialing mode between
Tone and Pulse.
FLASH TIME
The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet your telephone line or PABX
requirement.
1.
Press OK key, then using ▲ or ▼ key to select FLASH TIME item.
2.
Press OK key to enter.
3.
Press ▲ or ▼ key to select the desired flash time among 100ms, 300ms, 600ms and 1000 ms.
4.
Press OK key to confirm your selection.
MODIFY PIN
Some functions (including handset delete and base default) require a PIN code. The default PIN is 0000, but
you are able to change to your personal 4-digit PIN.
1.
Press OK key, then using ▲ or ▼ key to select MODIFY PIN item.
2.
Press OK key to confirm, and the display shows PIN?
3.
Entry the existing PIN code for the base and handset by using numerical keys, then press OK to confirm.
4.
If the old code is validated, the display shows NEW PIN, enter a new PIN code (4 digits), press OK to
confirm.
5.
The display shows REPEAT, input the new PIN code again.
All manuals and user guides at all-guides.com
key for 5s, IN USE/CHARGE LED flashes, then press
key continuously to review the rest information
26
key 7 times swiftly, the
Publicité
