Publicité
Les langues disponibles
Les langues disponibles
2.
Press OK key, when the function is selected, the screen will display the current handset label.
3.
Enter the handset label.
4.
If you make a mistake, press R key to correct.
5.
Press OK key to confirm.
AUTO ANSWER
The Handset can be set to answer an incoming call automatically by simply pick it up from the charging
cradle. The user is able to select to enable/disable this auto answer feature.
1.
Press OK key. Using ▲ or ▼ key to select AUTO ANSWER,
2.
Press OK key to enter.
3.
Press ▲ or ▼ key to select On or OFF
4.
Press OK key to confirm your selection. Exit from this sub-menu and return the user to the AUTO
ANSWER.
BARRING
You can set 4 numbers (up to 4 digits each) for call barring.
When the call barring is "ON", any numbers beginning with the programmed digits will not be able to be dialed
out.
1.
Press OK key. Using ▲ or ▼ key to select BARRING,
2.
Press OK key the user will be prompted to enter the PIN code, input 4-digit code (defaulted as 0000).
3.
Press OK key to enter, then using ▲ or ▼ key to select ON or OFF, press OK to confirm.
4.
If select ON, the display shows NUMBER 1, press ▲ or ▼ to choose NUMBER i(i=1~4).
5.
Then press OK key to confirm, using the numerical key to input number (maximum 4 digits) which you
want to bar. (For example: if you set barring number is 1234, then the numbers begin with 1234 will be
not allowed to be dialed out, and LCD display CALLS BARRED.)
DATE & TIME
The user is able to set the date and time on the handset, by selecting the following option.
1.
Press OK key. Using ▲ or ▼ key to select DATE&TIME,
2.
Press OK key and the last two digits of the year flashes.
3.
Edit the year, month, date and time by pressing ▲ or ▼ key.
4.
Press OK key to confirm the setting, and return to the DATE & TIME menu.
Notes:
1.
The date and time will be automatically set when the caller ID message is received in FSK.
2.
When the unit is powered on initially, the date and time will be blinking, please to set the date and time
first according to use above methods.
SELECT BASE
The handset can be registered to more than one base (up to a maximum of 4), and you can select which
base you want the handset to operate with.
1. Press OK key, then using ▲ or ▼ key to choose SELECT BASE.
2. Press OK key and the LCD displays BASE 1 +. (Handset link with base which numbers followed by a "+").
3. Press ▲ or ▼ to select base (BASE 1~4) or AUTO.
4. Press OK to begin searching, if you hear a sound of "di-du-di", means linked successful.
Note: If you select "AUTO", the handset will link with the first of the registered bases that it finds.
HANDSET DEFAULT :
All manuals and user guides at all-guides.com
29
Publicité
