Publicité
Les langues disponibles
Les langues disponibles
Press
key will insert a time delay of 3.6 seconds in a dialing sequence.
Pre-dialing
The unit has pre-dialing function, when you may enter and edit the number before dial it out.
The following procedure describes how to use this function:
1.
In idle mode, enter the number you want to dial. During entering, you can press R key to correct the
number.
2.
Press
or
key once, the unit will dial out the number show on the LCD.
Redial function
1.
Press
key or
2.
Press
key, the last dialed number will be dialed again.
Intercom
The intercom feature is activated by pressing the
1.
In idle mode, press
2.
The user will be prompted to select the number of the internal handset with which you wish to connect.
3.
The destination handset will ring. Press
mode, either handset can hang up the call by press
Note: The destination handset will stop ringing if it is not answered within 30 seconds.
Call transfer
During a call, it's to transfer the call to another handset.
1.
During an external call, press
handset with which they wish to connect.
2.
The destination handset will ring. With the melody defined for an internal call.
3.
Press the
or
4.
The two internal handsets will be connected. To complete the transfer of the call, the initiating handset
should be hanging up and the external call will now be connected to the second handset.
5.
Or if the other handset does not answer, you can get back to the external call by pressing
or you will automatically be reconnected to the outside call after 30 seconds.
Party conference call
1. When a call comes, press (HS1)
2. Then press (HS1)
which you wish to connect, e.g. HS2
3. The destination handset (HS2) will ring.
4. Press (HS2)
or
5. Press (HS1) the
To Lock/Unlock the Keypad
To lock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, the icon
While the keypad is locked, any key you press is invalid.
To unlock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, the icon
All manuals and user guides at all-guides.com
key,
key once.
or
key once, you will be prompted to select the number of the internal
key of the other handset to accept the call.
or
key
key once, you will be prompted to select the number of the internal handset with
key to accept call.
key then you can talk all together.
will appear on the top of display, "HS LOCKED" will appear on LCD.
will disappear from the display and it will go back to idle mode.
key.
key to enter conversation mode. To end intercom
key.
31
key again
Publicité
