Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Module/FCC ID ........................... 5123A-11/QOQ11
Weight ..........................................................2.8 lbs
Weight ..........................................................6.3 lbs
(With heaviest compatible battery pack)
Recommended Ambient
Operating Temperature .................... 0°F to 125°F
Cat. No. ..................................................... 3060-20
Anvil Type .................................... 3/8" Friction Ring
RPM ............................................................. 0-2325
IPM .............................................................. 0-3500
Cat. No. ..................................................... 3061-20
Anvil Type .................................... 1/2" Friction Ring
RPM ............................................................. 0-2325
IPM .............................................................. 0-3500
Cat. No. ...................................................3061P-20
Anvil Type ....................................... 1/2" Detent Pin
RPM ............................................................. 0-2325
IPM .............................................................. 0-3500
FUNCTIONAL DESCRIPTION
Cat. No. 3061P-20
2
1
10
11
1. 1/2" Detent pin anvil
(3061P-20)
2. LED
3. LED performance
indicator
4. Control switch
5. Handle
6. Belt clip
7. Speed control
indicator
(Tool-Only)
9
8
7
6
8. Drive control button
9. Trigger
10. 1/2" Friction ring anvil
(3061-20)
11. 3/8" Friction ring anvil
(3060-20)
WARNING
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
use on impact wrenches and drivers. Other
sockets and accessories might shatter or break
causing injury.
Attaching and Removing Accessories
Square Drive Impact Wrenches
(Cat. No. 3060-20, 3061-20)
1. WARNING! Remove battery to avoid starting the tool.
2. Use only the appropriate size square drive sockets.
3. To attach a socket, align the accessory with the
3
anvil and push it firmly over the retaining ring.
4. To remove the accessory, pull the accessory off
the anvil.
Square Drive Impact Wrench with Pin Detent
1. WARNING! Remove battery to avoid starting the tool.
2. Use only the appropriate size square drive sockets.
3. To attach a socket, align the hole in the accessory
with the detent pin on the anvil. Hold the detent
pin in while pushing the socket onto the anvil.
4
The detent pin will snap into place in the hole to
secure the socket.
4. To remove the socket, insert a nail or other thin
5
object into the hole in the accessory and press
in the detent pin. Pull the accessory off the anvil.
To learn more about the ONE-KEY™ functionality
for this tool, go to milwaukeetool.com/One-Key. To
download the ONE-KEY™ app, visit the App Store
or Google Play™ from your smart device.
Solid Blue
Blinking Blue Tool is actively communicating with
Blinking Red Tool is in security lockout and can
4
ASSEMBLY
Recharge only with the charger
specified for the battery. For spe-
Always remove the battery pack
any time the tool is not in use.
Use only sockets and other acces-
sories specifically designed for
(Cat. No. 3061P-20)
ONE-KEY™
ONE-KEY™ Indicator
Wireless mode is active and ready
to be configured via the ONE-KEY™
app.
the ONE-KEY™ app.
be unlocked by the owner via the
ONE-KEY™ app.
®
Publicité
