Filling With Oil; Control Before Starting - Husqvarna 91VG Manuel D'utilisation

Filling with oil

• Open the cap on top of the
cutting head.
• Fill with Husqvarna Chain
Oil.
• Refit the cap.

Control before starting

• Inspect the working area. Remove objects that can be
thrown.
• Check the cutting-
equipment. Never use
blunt, cracked or
damaged equipment.
• Check that the machine
is in full working order.
Check that all nuts and
bolts are tightened
correctly.
• Make sure the chain is always well lubricated.
• Ensure the cuttingequipment always stop when the engine
is idling.
• Only use the machine for what it is intended for.
• Ensure that the handle and safety functions are in order.
Never use a machine that lacks a part or has been modified
outside of the specifications.
ASSEMBLY
15
English –