Husqvarna 91VG Manuel D'utilisation page 11

• Use the stop at the base of
the bar to provide support
during cutting. This will
help prevent the cutting
equipment from jumping
on the branch.
• Make an initial cut on the
underside of the branch
before cutting through the
branch from above. This
will prevent tearing of the
bark, which could lead to
slow healing and cause
permanent damage to the
tree. The first cut should
not be deeper than 1/3 of
the branch thickness to
prevent jamming. Keep
the chain running while
you withdraw the cutting
equipment from the
branch to prevent it
jamming.
• Use the harness to support
the weight of the machine
and make it easier to
handle.
• Make sure you have a firm
footing and will not be
hampered by branches,
stones and other trees.
!
WARNING!
Never use the throttle without having a
full view of the cutting equipment.
SAFETY INSTRUCTIONS
11
English –