DeWalt DXPAEV040 Manuel D'instructions page 5

WARNING - Grounding Instructions for
Cord-connected Product
This product must be grounded� If it should malfunction or break
down, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock� This product is equipped
with a cord having an equipment grounding conductor and a
grounding plug� The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local
codes and ordinances�
WARNING: Improper connection of the equipment-grounding
conductor is able to result in a risk of electric shock� Check with a
qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded� Do not modify the plug provided
with the product - if it will not fit the outlet, have a proper NEMA 14-50
outlet installed by a qualified electrician�
SAVE THESE
INSTRUCTIONS
Before First Use
DANGER: Risk of suffocation! Keep any packaging materials
away from children and pets - these materials are a potential source
of danger, e�g� suffocation�
• Remove all packaging materials
• Remove and review all components before use�
• Check the product for transport damages�
Main Unit Components
A. Main Unit
B. Display
C. Handle Cradle
D. Release Lever
G
E. Charging Handle
F. Protective Cover
G. Wall Bracket
A
Wall Mounting Hardware
H. Screws (x4)
I. Wall Anchors (x4)
H
Display
L. Output Current
M. Charging Status
N. Wi-Fi Status
O. Charging Time
L
R
Installation Instructions
WARNING: Wear proper personal protection equipment when
installing the product�
CAUTION: Protect the product from harsh weather conditions
such as rain, snow and extreme temperatures� Consider installing the
product under a carport or in a garage�
CAUTION: Install the product in a safe location away from
flammable materials and out of reach of children and pets�
CAUTION: Take care not to drill into any pipes or power lines
B
beneath the surface during mounting holes preparation� Use a power
line/ metal detector�
NOTICE: It is recommended to install the product at a sufficient
C
height from grade such that the height of the storage means for the
coupling device is located between 24" (600 mm) and 48" (1�2 m)
from grade�
D
• Install the product within convenient proximity to where there is
an existing NEMA 14-50 outlet. Additionally, ensure that the cord
E
or wiring leading into the product has some slack.
• For optimal charging efficiency, place the product as close as
F
possible to the electrical panel to avoid lengthy cable runs.
• Install the product to an easily accessible location for the driver
to plug in and out the vehicle. Make sure the installation location
allows enough slack for the charging cable to reach the vehicle's
charging port.
• Test the Wi-Fi signal quality at the installation location.
• The wall used for installation must have the capacity to support
the weight of the product and its accessories and must remain
level once the installation is completed.
• Avoid installing the product in areas with excessive vibration or
elevated temperatures.
5
J. Bolt (x1)
K. T25 Torx L-Key (x1)
I J
P. Actual Current
Q. Electricity Consumption
R. Voltage
M
Q P O
K
N