Menvier SD1+ Manuel D'utilisation Et De Programmation page 50

All manuals and user guides at all-guides.com
Whether a test call has been started or an alarm has been
triggered, it is important in both cases to ensure that the
recipient is familiar with the acknowledgment procedure so that
the alarm call can be successfully acknowledged and the alarm
ended.
1. When the recipient's telephone rings, it is answered as a
normal phone call.
2. The SD1+ then plays the general message followed by the
alarm message of the alarm trigger. In some cases it may
take up to 5 seconds until the message is initiated.
3. After both messages are played, a beep sounds to prompt
acknowledgment of the alarm.
8
Press on the telephone handset after the beep to
acknowledge the alarm call.
4. An acknowledgement tone sounds if acknowledgement was
successful.
5. The recipient should then take any necessary action in view
of the alarm.
22
Testing the acknowledgment function