Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Once the SD1+ has made its call and delivered the message, it
requires an acknowledgement that confirms that the message
as been successfully received. This is done by pressing
the telephone handset. When reception is confirmed, the alarm
procedure is ended. The setting in this menu specifies how
often the message has to be acknowledged before the message
is considered sent. The possible values are
ANY-3
ALL-4
NO-ONE
,
and
ANY-2
required;
= 2 acknowledgement required etc.; and
NO-ONE
= no acknowledgement required).
1. Ensure that the SD1+ is initialised and the display is showing
READY
(see page 8).
0
2. Press
and the display shows
e
3. Press
and the display shows the currently set value.
ANY-1
For example:
.
Go through the other values (
NO-ONE
and
) by pressing the
e
4. Press
to confirm the selection and
the display.
Acknowledgment options
ANY-1
,
ANY-1
(
= acknowledgement
CLEARBY-
.
ANY-2
ANY-3
ALL-4
,
,
B
key.
READY
shows in
SD1+
????
8
on
READY
CLEARBY-
ANY-2
,
e
1 acknowledgement req.
ANY-1
B
2 acknowledgements req.
ANY-2
B
3 acknowledgements req.
ANY-3
B
All required
ALL-4
B
No acknowledgements req.
NO-ONE
e
READY
0
15
Publicité
