Publicité
Les langues disponibles
Les langues disponibles
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
WARNING:
Do not hold the soldering pen with your fingers near any
metal part of the tool. The tip of the tool reaches working
temperature within seconds. Always assume that the
soldering tip is hot. Touching a hot soldering tip can result
in serious personal injury.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
OPERATION
WARNING:
Do not use or store the soldering pen near flammable or
combustible materials or liquids. These materials may
ignite when exposed to the high temperatures created
by the tip.
APPLICATIONS
You may use this product for the purposes listed below:
Soldering circuits, wiring joining, and electrical connec-
tions
Soldering of jewelry, stained glass, automotive repair, etc.
WARNING:
Battery tools are always in operating condition. Remove
the battery pack when the product is not in use or when
carrying at your side.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 8.
WARNING:
To reduce the risk of injury, the soldering pen should be
considered to be HOT whenever the LED light on the unit
is illuminated. Following this rule will reduce the risk of
burns, fire or serious personal injury.
To install:
Unscrew and remove the battery cap.
Insert the battery pack into the product as shown.
Place the battery cap over the battery pack and push
down until the cover meets the threads at the end of
the tool.
Screw the battery cap on securely.
NOTE: Do not attempt to use this product if the battery
cap is not securely closed.
5 — English
Publicité
