Klarstein 10031083 Mode D'emploi page 12

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Technical Data 12
Safety Instructions 12
Product Description and Accessory 13
Installation 14
Remote Control and Receiver 17
Frequency Settings 18
Wiring Diagram 18
Fuse Replacement 20
Troubleshooting 20
Hints on Disposal 21
Declaration of Conformity 21
Item number
Power supply
• Installation must be carried out by a qualified electrician.
• Turn off the electrical mains at the circuit breaker/fuse box.
• Do not use power supply other than 220V~240V ~ 50-60Hz.
• This appliance must be earthed.
• When mounting the fan, ensure that the safety wire is looped across the mounting bracket.
• The mounting bracket must be able to withhold a min. weight of 35 pounds.
• The ceiling fan must be mounted at a min. height of 7.5 feet / 2.3 m of clearance from the floor.
• Do not place any objects in the path of the blades.
• When all electrical connections are done, store all wires neatly.
• Make sure that all screws and connections are tightly screwed and secured.
ATTENTION: This product is designed to use only those parts supplied with this product and/or accessories
designated specifically for using with this product. Using parts and/or accessories not designated
for using with this product could result in personal injury or property damage.
All manuals and user guides at all-guides.com
Contents
Technical Data
10031083
220-240 V ~ 50-60 Hz
Safety Instructions
12